Site Information

 Loading... Please wait...

Power Inflators - Parts

            Power Inflators - Parts       This is our power inflator area. In here you will find the power inflators and the parts to fix them.    Johns Quick Tip’s: Keep your BC Working  Ok this is a bold statement with the proper tools all BC problems can be fixed by the diver.  Follow the tips below and you will be good as new.   1. Inflator Rebuilds More dives are lost to this malfunction than most other things. The inflator is easy to rebuild if you have the proper tools.  You will need an inflator tool and some o-rings. There are four o-rings inside (2) 006 (1) 012 and (1) 112 plus one 011 on the inflator nipple.  The inflator is easily pulled out as an assembly, once it is out you need to hold the button and put a wrench on the back.  Then you take the center shaft out the two o-rings here are the culprits. Clean the corrosion off the shaft and body, put new o-rings on, lubricate and reassemble. Then of course test before you go back in the water.