Change Language: Deutsch English (UK) English (US) Español Française Dutch

Remora Mounting System

$100.00 $19.99

4.5 average, based on 2 reviews

Product Information

 

 

 

 

 

 

Remora Mounting Systems

 

 

Normally $100.00

Crazy John $19.99

You save 80%

 

The REMORA quick release tank mount system is used to quickly and easily mount and detach pony bottles or to configure independent doubles. Its one-touch, quick release allows divers to change cylinders easily. The REMORA system includes mounting blocks for tanks with 5.5-inch (14 cm) to 8-inch (20.3 cm) diameters and is color coded for easy installation. The blue cylinder pad is designed to lie against the primary tank, while the yellow cylinder pad is for smaller pony bottles. The GM2766 REMORA kit includes two blue cylinder mounting pads and one yellow cylinder pad. GM2766-1 REMORAa tank mount system comes with the kit, plus two HW1084 small stainless steel clamps and tubular webbing for mounting a pony bottle (cam strap not included). GM2766-2 REMORA independent double system kit comes with two REMORA kits, four cam straps and bolt kit.

 

Note: Sold separately, one small cam strap is necessary to mount a pony bottle.

 

Uses:

Rebreathers

Pony Bottles

Travel Doubles (requires two remoras, 4 cam bands, bolt kit.

 

Product Code: 123-017

Customer Reviews

Average Rating: 4.5

Update

After a year of usage and a couple of hundred dives I thought I'd update my earlier review. You'll see I have given it 5 full stars! The Remora is a little worse for wear but has held up well. I recommend splitting the connection at the end of the day and washing each piece separately in fresh water to avoid a build up of oxidization but even after a couple of hundred dives it is still going well and the nut hasn't worked lose again and the separation under load is greatly improved by using a small amount of marine grease. The pin that I thought was a bit on the skinny side has been just fine so I would recommend this without any reservation.

Nigel :: Jul 06 2010, 11:19 AM

Nice peice of kit

I am a divemaster and bought one of these to mount a stage cylinder on my main tank. The system secures the tank firmly in place avoiding the annoying flopping around that webbing straps can sometimes give you. It is really easy to lock and unlock the two halves of the ramora when it is in your hands but when it is attched to two cylinders and is then under load, it can be a bit fiddly - but this may just be a case of getting used to it. The locking pin looks very delicate and I wonder about its longer term durability. Also the nut securing the locking pin did work loose on mine but I tightened it up and since then have not had a problem. So far so good. If they are going to make a version 2 of this then it might be an idea to beef the locking pin up a bit just for peice of mind. I am sure that the engineers will tell you its fine but I'd like something a bit beefier. I would also like some inserts to allow it to be used with smaller cylinders down to say 4" and even 2" so that I could mount the battery canister for my torch to my main tank. Overall a nice peice of kit and I will probably get another. By the Way I got good service from Northeast SCUBA Supplies even though I I live Down Under in Australia Thanks!

Nigel :: Sep 11 2009, 02:28 AM

Write a review