
Dive Rite Nomad - 2009 Edition
Dive Rite #BC4500
The Nomad EXP Sidemount Rig is the latest design in sidemount gear, replacing our Nomad Expedition Rig and Nomad Basic Rig. Now created as one continuous harness, wing and buttplate system, divers can be even more streamlined with this new design. And with of 60lbs/27kg, divers can wear a wetsuit and high volume steel tanks with confidence.
Streamlining is achieved by integrating the TransPac® harness through wing keepers that hold the wing low across the back to reduce drag. Proper trim comes from the longer wing and a Gusset Control System (GCS) cord that is woven through tabs on the front face of the wing. The GCS cord is positioned on the upper portion of the wing, forcing the lower part of the wing to inflate preferentially, keeping lift around the divers hips where it is needed. Utilizing the TransPac® harness, tanks are attached with a bungee and buttplate system that allows the tanks to ride closely at the diver's side, yet not be jammed under the arms, as this can "A-framing" when backing out of tight restrictions. A standard 2-inch crotch strap is included. Made in the
Tech Specs:
The Nomad Expedition Rig is completely customizable as follows:
Note: Dive Rite is happy to SHORTEN any bungee length if you find what you ordered is too long. Call us and send them back using our standard RMA process. However, if you order the bungees too short, we CANNOT lengthen them.
Sizing
M 15 to18 inches
L 17 to 22 inches
XL 18.5 to 23.5 inches
XXL 22.5 inches and up