![[IMAGE]](images/jpg/hosead_1.jpg)
High Pressure Adapters
073-013 Metric to 3/8 adapter for Posiedons $8.99
57140 For the right angle installation of older consoles/gauges
with 3/8-24 threads $39.99
57190 Same as #57140, for current consoles with 7/16-20 threads. Allows 90 degree
installation of console. Part# 004 668 $23.99
57195 A 90 degree swivel with 3/8" inlet and 7/16" outlet; for putting current
consoles on older model regulators. $39.99
57215 A 90 degree swivel with two 7/16-20 outlets for multiple consoles, gauge,
or computer devices. Part#012 900 $39.99
57260 Simple bushing adapter: Converts 7/16 port to female 3/8. $5.99
57265 High pressure port(7/16) extender; Shims hoseless computer transducer
out from regulator body. Part # 004 799 $5.99
57270 Simple bushing adapter: converts 3/8 port to female 7/16. $5.99
57295 Regulator Overpressure Safety Valve
part# 054 031
Certain Tek-diving applications(argon in drysuits) require use of a regulator
first stage in a closed system where a high pressure seat failure can result
in a burst hose or rupurted dry suit valve. This pressure relief valve is set
for 300psi to carry off excess pressure without hose rupture. All stainless/brass
construction. $24.99
Low Pressure Adapters
57150 A banjo fitting which allows full 360 degree articulation of most 2nd
stages without affecting the flow rate. Part# 033 016$39.99
57155 A 90 degree swivel for right hand installation of LP hoses with 1/2" male
end fittings. $26.00
57200 Sames as #57155, but for LP hoses with 3/8 male end fittings. Part# 004
959 $23.99
57205 Regulator hose union: Allows 2 hoses (3/8") to be mated Part# 004 819$6.50
57210 Three port swivel tee: converts one 3/8 LP port to triple 3/8 outlet ports.
Part# 012 900 $39.99
57250 TEK Adapter: Converts 3/8" male end hose to 1/4 male NPT Part# 012 009
$9.99
57280 Simple bushing Adapter: cnoverts 3/8" port to female 1/2" Part# 001 025
$5.99
57290 Simple Bushing Adapter: Converts 1/2" port to female 3/8" Part# 001 026
$5.99
57300 BC coupler male stud to male 1/4 NPT: for putting air guns, tire inflators,
etc. onto BC hoses. Part# 012 803 $4.99
57301 Sames as #57300, but with 1/8" MNPT Part# 012 979 $4.99
57305 TEK Adapter: Converts swivel end of hose to 1/4" male NPT Part # 012 980
$9.99
57315 TEK Adapter: Converts 3/8" body port to 1/4" male NPT. Part # 012 798
$9.99
ADDITIONAL ITEMS NOT PICTURED
1/4" NPT to 3/8" o-ring Part# 004 797 $6.99
Reg hose to air adapter Part# 004 014 $19.99
45 degree reg swivel Part# 004 667 $23.99
Scuba Pro inflator to 1/4" NPT Part # 004 804 $7.99
BC to 1/4" NPT Part# 012 803 $4.99
Air to coupler Part# 029 002 $34.99
Metric to 7/16 o-line adapter for Posiedons Part# 076 050 $8.99
Back To Main Pages:
John's Scuba Equipment
John's New Scuba Gear Page
John's Used Scuba Equipment